Product Name :S49 Magnesium Alloy Cutting Fluid

DESPRIPTION

S49 Magnesium Alloy Cutting Fluid is a water based synthetic Coolant for rmedium and high load of machining of magesium alloy. It exhibits excellent properties of tramp oil rejection and corrosion inhibition to magnesium.

S49 Magnesium Alloy Cutting Fluid does not contain mineral oil, or any sulfur, chlorine and phosphorus additives.

S49 Magnesium Alloy Cutting Fluid is a liquid with light color and low odor. It is transparent when diluted with water. A distinguishing characteristic of this product is that it runs extremely clean with minimum foam, without any anti-foam additives.

S49 Magnesium Alloy Cutting Fluid can reach the degree of water hardness up to 8000 ppm.

FEATURES AND BENEFITS

• Outstanding cooling properties

• Excellent swarf settling properties

• Excellent protection for magnesium alloy

• Low foaming property

• Exceptional tramp oil rejection

• Good bio-stability

TYPICAL PHYSICAL AND CHEMICAL PROPERTIES

Appearance (Neat)

Clear colorless liquid

Appearance ( 2.5% in DI water)

Clear colorless liquid

Specific Gravity @ 24℃

1.07

pH, ( 2.5% in DI water)

7.5-8.5

Solubility in water

100% miscible

USAGE

1. Must clean up the system before Use

2. Dilute by water from 1:10to 20

APPLICATIONS

S49 Magnesium Alloy Cutting Fluid can be mainly used on magnesium alloy.

STORAGE

• Store inside warehouse

• Store out of direct sunlight

• Avoid water collecting on barrel top