- FOB goods (100)
- $49,955
- Ocean freight + handling (0.3 CBM)
- $820
- US duty (2.7%)
- $1,349
- Section 301 tariff (25.0%)
- $12,489
- Customs fees (MPF/HMF)
- $235
Estimate in USD to a US port using category averages (HTS 8536/8504/8507), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- Service
- From $29 per supplier (Verify)
- You get
- Phone and video verification, a quote sheet and a written report
- Turnaround
- 3 business days
- Contact details
- Sent to you once your request is confirmed
If we can't reach the supplier within 3 business days, we refund the fee.
- FOB goods (100)
- $49,955
- Ocean freight + handling (0.3 CBM)
- $820
- US duty (2.7%)
- $1,349
- Section 301 tariff (25.0%)
- $12,489
- Customs fees (MPF/HMF)
- $235
Estimate in USD to a US port using category averages (HTS 8536/8504/8507), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- Service
- From $29 per supplier (Verify)
- You get
- Phone and video verification, a quote sheet and a written report
- Turnaround
- 3 business days
- Contact details
- Sent to you once your request is confirmed
If we can't reach the supplier within 3 business days, we refund the fee.
About this product
- Materials: Copper Aluminum
- Exports to: Mainland China, Africa, Middle East, Southeast Asia, South Asia
- Made in: Henan, China
About this product
- Materials: Copper Aluminum
- Exports to: Mainland China, Africa, Middle East, Southeast Asia, South Asia
- Made in: Henan, China
Product details
| Materials | Copper Aluminum |
|---|
From the supplier
The characteristics of photovoltaic cables are determined by their special insulation and sheath materials for cables, which we call cross-linked PE. After irradiation by an irradiation accelerator, the molecular structure of the cable material will change, thereby providing its performance in all aspects . Resistance to mechanical loads In fact, during installation and maintenance, the cable can be routed on the sharp edge of the roof structure, and the cable must withstand pressure, bending, tension, cross-tensile load and strong impact. If the cable jacket is not strong enough, the cable insulation will be severely damaged, which will affect the service life of the entire cable, or cause problems such as short circuits, fire, and personal injury.
The cross-sectional area of the DC cable is determined according to the following principles: the connection cable between the solar cell module and the module, the connection cable between the battery and the storage battery, and the connection cable for the AC load. 1.25 times the current; the connecting cable between the square array of solar cells and the connecting cable between the storage battery (group) and the inverter, the rated current of the cable is generally 1.5 times the maximum continuous working current of each cable.
The photovoltaic cable supporting other photovoltaic modules is exported to Europe, and the cable must comply with the TUV MARK certificate issued by TUV Rheinland of Germany.
ConstructionConductorConductorΦOuter ΦResistance Max.Current CarringconstructionCapacityn×mm2n/mmmmmΩ/KmA1×1.530/0.251.584.913.3301×2.550/0.252.025.457.98411×4.056/0.302.36.14.75551×6.084/0.303.427.23.39701×10.0142/0.304.5691.95981×16.0228/0.305.610.21.241321×25.0361/0.306.95120.7951761×35.0525/0.308.7413.80.5652181×50.0720/0.309.2414.80.33932801×70.0988/0.301116.90.2773501×95.01349/0.3012.518.70.214101×120.01691/0.3014.220.70.164480
About the supplier
Main products: Cables,Wires,Coaxial cable
- ✓Exhibited at 10 of the last 10 Canton Fairs
- ✓Manufacturer
- ✓Founded 2005
- ✓Canton Fair Premium Supplier
- ✓National high-tech enterprise
- Exhibited at 10 of the last 10 Canton Fairs
- Manufacturer
- Founded 2005
- Canton Fair Premium Supplier
Similar products from other suppliers
Add a few to compare, then request quotes from all of them at once.
