Canton FairSourcing
Visit the Q&T INSTRUMENT CO.,LTD. store

80G radar level meter

4/10 fairsIndustry and Trade CompanyModel QTRD
80G radar level meter
$50000$60000/ unit FOB
The supplier did not say what one unit is (piece, set, box). We confirm this when we get the quote.
MOQ 1 unit · T/T, L/C, D/P, PayPal, Western Union
Estimated landed cost
$718 / unit
range $653$782 · total ≈ $71,754
FOB goods (100)
$55,000
Ocean freight + handling (1.0 CBM)
$820
US duty (3.5%)
$1,925
Section 301 tariff (25.0%)
$13,750
Customs fees (MPF/HMF)
$259

Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.

Service
From $29 per supplier (Verify)
You get
Phone and video verification, a quote sheet and a written report
Turnaround
3 business days
Contact details
Sent to you once your request is confirmed

If we can't reach the supplier within 3 business days, we refund the fee.

From the supplier

This series of radar level meter adopted 26G high frequency radar sensor, the maximum measurement range can reach up to 70 meters. Antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.

Features
  • Small antenna size, easy to install; Non-contact radar, no wear, no pollution.
  • Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes.
  • Serious dust environment on the high level meter work has little effect.
  • A shorter wavelength, the reflection of solid surface inclination is better.
  • Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.
  • The measuring range is large. A good measuring result will be got in the measuring process.
  • High signal-to-noise ratio, the level fluctuation state can obtain better performance.
  • High frequency, measurement of solid and low dielectric constant of the best choice.

Enter the finished product warehouse and wait for transportation

Model Suitable for Medium Measuring Range
(meters) Temper-
ature Connection Process Pressure Measure-
ment
Precision

Other

901 All kinds of corrosive liquid 10 -40℃ ~ 120℃ Flange(optional)/
Thread -0.1 ~ 0.3 MPa ±5mm Explosion-proof Grade:
Exia IIC T6 Ga

Frequency :26 GHz

The signal Output:(4 ~ 20) mA/HART (Two
wire/Four)RS485/Modbus

The Scene Display:4- digital LCD

Shell :Aluminum 902 Liquid 30 -40℃ ~ 150℃ Flange (optional) / Thread -0.1 ~ 4.0 MPa ±3mm 903 Solid material,Strong dust 70 -40℃ ~ 250℃ Universal Flange -0.1 ~ 0.1MPa ±15mm 904 Solid material,Strong dust 70 -40℃ ~ 250℃ Universal Flange -0.1 ~ 0.1MPa ±15mm 905 Solid particles,Powder 30 -40℃ ~ 250℃ Thread, Flange -0.1 ~ 4.0MPa ±10mm 906 Hygienic liquid
storage,corrosive container 20 -40℃ ~ 150℃ Flange -0.1 ~ 0.1MPa ±3mm

About the supplier

Q&T INSTRUMENT CO.,LTD.

Main products: Sensors, Electronic instruments, Other Instrument and Meters, Special instruments, Oval gear flow meter, Oval gear meter

  • Exhibited at 4 recent Canton Fairs
  • Industry and Trade Company
  • Founded 2005
  • Canton Fair Premium Supplier
  • National high-tech enterprise
  • 1 certificate on file
See all products from this supplier →
Supplier
Q&T INSTRUMENT CO.,LTD.
Kaifeng, Henan, China
51
trust
  • Exhibited at 4 recent Canton Fairs
  • Industry and Trade Company
  • Founded 2005
  • Canton Fair Premium Supplier

Similar products from other suppliers

Add a few to compare, then request quotes from all of them at once.

$500.00–$600.00 / unit
MOQ 1 · Verify for $29
Get a quote