TDZ (super strong, 4-star quality, green bottle packaging): Net content: 300ML/piece, net weight: 355g, specification: 24 pieces/carton, shear force: 15 kg/cm², peel strength: 1.5Mpa, The initial adhesion is strong, the surface opening time is about 45 seconds, and the complete curing time is about 48-72 hours. Suitable for decoration of hotels, hotels, and entertainment venues.

Product introduction: Nail-free glue/liquid nails are synthesized from SBS rubber and a variety of high-performance resins. They are widely used to bond a variety of building materials and decoration materials. They are the best product to replace nails/screws.

Application range: 1. UV board/aluminum-plastic board/plastic board/paint-free board/wood/stainless steel board, and other board materials; 2. PS line/stone plastic line/wood line/plastic line/skirt line/stainless steel line /Aluminum alloy lines, and other different material lines; 3. Stone/tiles/cultural stone/marble/cement board, and other stone materials; 4. Mirrors/photo frames/picture frames, and other frame industries; 5. Advertising signs/Chevron Board/acrylic board, and other advertising industry.

How to use: The surface of the sticky object must be clean, dry, oil-free, and dust-free, and remove all loose and floating ingredients. Before gluing, cut the mouth of the bottle with a utility knife, and then smash the aluminum foil film inside the mouth of the bottle with a sharp mouth. Glue normally. 1. Bonding method for lighter materials: glue on one side of the object to be glued in dots, strips or S shapes (with an interval of about 10-20 cm). Be sure to apply the glue at a distance of 1-2 cm inward from the edges of the object. , Then fit the object in place, and press it by hand immediately. The adhered object can be fine-tuned within 5 minutes, and the weight can be loaded after about 24-72 hours (depending on the degree of pore absorption on the surface of the adhered object and the construction environment temperature). 2. Bonding method for heavier materials: first glue the heavier material and the surface to be bonded separately, and then use a scraper to scrape all the glue on the two sides that have been glued, and then immediately apply the two Fit the surface and press it in place with your hands (provide auxiliary support if necessary).

Product features: 1. No formaldehyde, no triphenyl, clean odor, environmentally friendly formula

2. Versatile indoor and outdoor / stronger and more durable / suitable for a variety of climates

3. High hardness, good flexibility; fast positioning, high efficiency, time-saving and labor-saving

4. Water resistance, weather resistance and aging resistance

5. -18°C—+40°C is the best construction environment temperature