Outdoor Pole Mounted Load Disconnect Switch
ZHEJIANG HAIVO ELECTRICAL CO., LTD
See what’s includedHide breakdown
- FOB goods (100)
- $1,350
- Ocean freight + handling (0.30 CBM)
- $820
- US duty (2.7%)
- $36
- Section 301 tariff (25.0%)
- $338
- Customs fees (MPF/HMF)
- $34
Estimate in USD to a US port using category averages (HTS 8536/8504/8507), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (100)
- $1,350
- Ocean freight + handling (0.30 CBM)
- $820
- US duty (2.7%)
- $36
- Section 301 tariff (25.0%)
- $338
- Customs fees (MPF/HMF)
- $34
Estimate in USD to a US port using category averages (HTS 8536/8504/8507), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
Outdoor Pole Mounted Load Disconnect Switch
ZHEJIANG HAIVO ELECTRICAL CO., LTDSee what’s includedHide breakdown
- FOB goods (100)
- $1,350
- Ocean freight + handling (0.30 CBM)
- $820
- US duty (2.7%)
- $36
- Section 301 tariff (25.0%)
- $338
- Customs fees (MPF/HMF)
- $34
Estimate in USD to a US port using category averages (HTS 8536/8504/8507), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (100)
- $1,350
- Ocean freight + handling (0.30 CBM)
- $820
- US duty (2.7%)
- $36
- Section 301 tariff (25.0%)
- $338
- Customs fees (MPF/HMF)
- $34
Estimate in USD to a US port using category averages (HTS 8536/8504/8507), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
About this product
- Materials: polymer
- Size: 400
- Color: gray
- Exports to: Middle East, Southeast Asia, South Asia, Central Asia, USA and Canada, Latin America, Russia, EU, Other European Countries, Others
- Made in: Zhejiang, China
About this product
- Materials: polymer
- Size: 400
- Color: gray
- Exports to: Middle East, Southeast Asia, South Asia, Central Asia, USA and Canada, Latin America, Russia, EU, Other European Countries, Others
- Made in: Zhejiang, China
Product details
| Materials | polymer |
|---|---|
| Size | 400 |
| Color | gray |
Product details
| Materials | polymer |
|---|---|
| Size | 400 |
| Color | gray |
From the supplier
General
FW1 type Outdoor on load break switch (switch disconnector) contained in this list are destinedtoswitch stub lines and ring main lines or transformers( It can be equipped with MV HRC fuselinksas short circuit protection function) or for switching under on loadconditions.
FW1 type switch comply with IEC/IEEE and DVE-recommendation standards. Especiallycomplywith DIN VDE 0670 part 3 and IEC publication IEC-60265,IEC-129.
Service environment
- Air temperature: Maximum temperature: +75ºC; Minimum temperature:-45ºC
- Humidity: Monthly average humidity 95%; Daily average humidity 90% .
- Altitude above sea level: Maximum installation altitude: 2500m
- Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
- No frequent violent shake
- Compact design
- All steel parts either in stainless steel or hot-dip galvanized
- Solid and stable base frame
- Main contact with icing protection
- Insulators available in porcelain or alternatively in silicone
- Minimal sag for the line-connection thanks to the two fixed terminals
- Completely maintenance antirust AL alloy -Arc chamber
- Switching-off procedure without external arc
- Short circuit making capacity under specific conditions possible
- Fixing on the supporting structure either by clamping (free setting) or screwing (holes in the base frame)
- Easy on-site installation and setting
- High reliability: up to 1'000 cycles (depending on the making current)
- All conducting parts either silver, nickel or tin-plated
- Practically maintenance-free
- Main technical specifications
- No.ItemUnitData1Rated voltagekV1224362Rated frequencyHz50/603Rated currentA200/400/6304Rated short circuit withstand current (1S)kA205Rated peak withstand current (1S)kA506Rated making currentkA31.5-50
7
Rated insulation level(HV)lightning impulse
kV75/85125/145170/195Power frequency withstand4555/7575/100
8Rated short circuit breaking capacity cos. Φ(0.7)
Without maintenance of contacts
------------------------------
- for active circuits20 breakings
A63063040030 breakings40040030040 breakings30030025050 breakings25025017075 breakings170170160120 breakings110110110200 breakings656565280 breakings505050 - No.ItemUnitData1Rated voltagekV129For ring circuits breaking capacityA63010Rated breaking capacity of transformerA5011Rated breaking capacity of cable chargingA1112Rated breaking capacity of earthing faultA56
- Note:
The FW1 type on load break switch (Switch disconnector) is equipped with stored energy released by fuse strike pins. The stored energy mechanism for the opening operation is released by fuse strike pins. The trip actuator is mounted on top of the fuse contact clip.
The DIN type fuse is held in spring type contacts, secured by a tail lever. All the components are made of stainless steel, to prevent corrosion, have long live, and in the reset position. The trip lever is parked in an over-centre position.
From the supplier
General
FW1 type Outdoor on load break switch (switch disconnector) contained in this list are destinedtoswitch stub lines and ring main lines or transformers( It can be equipped with MV HRC fuselinksas short circuit protection function) or for switching under on loadconditions.
FW1 type switch comply with IEC/IEEE and DVE-recommendation standards. Especiallycomplywith DIN VDE 0670 part 3 and IEC publication IEC-60265,IEC-129.
Service environment
- Air temperature: Maximum temperature: +75ºC; Minimum temperature:-45ºC
- Humidity: Monthly average humidity 95%; Daily average humidity 90% .
- Altitude above sea level: Maximum installation altitude: 2500m
- Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
- No frequent violent shake
- Compact design
- All steel parts either in stainless steel or hot-dip galvanized
- Solid and stable base frame
- Main contact with icing protection
- Insulators available in porcelain or alternatively in silicone
- Minimal sag for the line-connection thanks to the two fixed terminals
- Completely maintenance antirust AL alloy -Arc chamber
- Switching-off procedure without external arc
- Short circuit making capacity under specific conditions possible
- Fixing on the supporting structure either by clamping (free setting) or screwing (holes in the base frame)
- Easy on-site installation and setting
- High reliability: up to 1'000 cycles (depending on the making current)
- All conducting parts either silver, nickel or tin-plated
- Practically maintenance-free
- Main technical specifications
- No.ItemUnitData1Rated voltagekV1224362Rated frequencyHz50/603Rated currentA200/400/6304Rated short circuit withstand current (1S)kA205Rated peak withstand current (1S)kA506Rated making currentkA31.5-50
7
Rated insulation level(HV)lightning impulse
kV75/85125/145170/195Power frequency withstand4555/7575/100
8Rated short circuit breaking capacity cos. Φ(0.7)
Without maintenance of contacts
------------------------------
- for active circuits20 breakings
A63063040030 breakings40040030040 breakings30030025050 breakings25025017075 breakings170170160120 breakings110110110200 breakings656565280 breakings505050 - No.ItemUnitData1Rated voltagekV129For ring circuits breaking capacityA63010Rated breaking capacity of transformerA5011Rated breaking capacity of cable chargingA1112Rated breaking capacity of earthing faultA56
- Note:
The FW1 type on load break switch (Switch disconnector) is equipped with stored energy released by fuse strike pins. The stored energy mechanism for the opening operation is released by fuse strike pins. The trip actuator is mounted on top of the fuse contact clip.
The DIN type fuse is held in spring type contacts, secured by a tail lever. All the components are made of stainless steel, to prevent corrosion, have long live, and in the reset position. The trip lever is parked in an over-centre position.
About the supplier
Main products: Composite insulator,Drop out fusecutout,Cable accessories,Switch disconnector/Circuit breaker,Lightning arrester/surge arrester,High-voltage fuse
- ✓Exhibited at 10 of the last 10 Canton Fairs
- ✓Manufacturer
- ✓Founded 2010
- ✓Canton Fair Premium Supplier
- ✓National high-tech enterprise
Light & Electrical exhibitors show in Phase 1 of the Canton Fair, 15 to 19 October 2026.
- Exhibited at 10 of the last 10 Canton Fairs
- Manufacturer
- Founded 2010
- Canton Fair Premium Supplier
