NANTAI 12 sections High-pressure fuel pumps test stand 12PSB Fuel stand injection pump 12PSB 11 kW for adjustment of high pressure fuel pumps of diesel engines. The engine power of the bench is 15 kW, it is designed for adjusting engines with no more than 12 sections.The stand allows you to adjust both imported and Russian in-line and distribution injection pumps. Stand manufacturer: "NANTAI AUTOMOTIVE TECHNOLOGY Co., Ltd". Also at the stand it is possible to adjust all distribution injection pumps of manufacturers: Bosch, Lucas, Zexel, Denso, MOTORPAL. It is possible to repair high-pressure fuel pumps of any equipment: cars, trucks and tractors, dump trucks, special equipment, agricultural machines and tractors Testing and adjustment of in-line high-pressure fuel pumps with up to twelve sections, as well as distribution-type injection pumps by monitoring the following parameters and characteristics: 1.Size and uniformity of fuel supply by sections (performance of pumping sections); 2.Frequency of rotation of the high-pressure fuel pump shaft at the moment the regulator starts to operate; 3.Frequency of rotation of the high-pressure fuel pump shaft at the moment of stopping the fuel supply; 4.Opening pressure of discharge valves; 5.The angle of the start of injection and the end of fuel supply. The main functions of the stand 12PSB: 1.Uniformity of fuel supply by high-pressure fuel pump sections; 2.Measurement of fuel supply angles by sections of high pressure fuel pump; 3.Checking the operational characteristics of the high-pressure fuel pump speed controller; 4.Testing the characteristics of the injection pump of the distribution type; 5.Boost corrector test; 6.Measurement of the amount of excess volume of the high-7.Pressure fuel pump of the distribution type; 8.DC voltage source (12/24V); 9.Checking the internal pressure of the fuel injection pump of the distributive type at various speeds set; 10.High pressure fuel pump leak test; 11.Testing of injection pump (pump), including the pump.