GK28, Voltage Detector

Introduction

This unit is a portable AC voltage detector, which can be used to check whether a cable or socket is live or distinguish between a live wire and a neutral wire. It has illumination function and two sensitivity degrees ( high and low sensitivity degrees ) for you to select from.    

Features

1. This detector can be used to check whether a cable or wire has ac voltage, locate breakpoint in a wire,or distinguish between a live wire and a neutral wire.

2. High and low sensitivity degrees for you to select from and to meet demands of different applications

3. The LCD display indicates the present intensity of the detected signal through the analog bar graph.

4. Safe non-contact AC voltage detection

5. Auto power off:  If   there is no detector operation or signal detection for about 5 minutes, the detector will turn off automatically.

6. Illumination function

Specifications

Voltage Detecting Range:  

AC48 ~ 1000V ( for low sensitivity detection mode )

         AC12 ~ 1000V ( for high sensitivity detection mode )

Frequency Response:  50Hz/60Hz

Measurement Category:  CAT III 1000V

Alarm Method:  

The built-in buzzer sounds beeps, the red signal LED flashes, and the display shows 

         two or more bars of the analog bar graph

Battery:  1.5V battery, AAA or equivalent, 2 pieces

Operation Environment:   

Temperature:  0°C ~ 40°C

         Relative Humidity:  

         Altitude:   * 2000 meters

         The detector is designed to be used indoors 

Storage Environment:   

Temperature:  -10°C ~ 50°C

         Relative Humidity:  

Size:  150mm × 29mm × 22mm  

Weight:  About 53g ( including batteries )