The supplier hasn’t listed a price. We can get their current prices and MOQ.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
The supplier hasn’t listed a price. We can get their current prices and MOQ.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
From the supplier
Direction For Use.
Keep the application surface dry and clean
The ratio between Part A (marble adhesive) and Part B (Hardener) is 100: 3,
If the end user wants to expedite or slow down the curing time, they can increase or reduce the quantity of Part B (Hardener), but too much Part B (Hardener) may change the color of the adhesive after its cured.
Mix thoroughly and apply with facer.
Attention
Do not return the mixed glue to the original packing, close the cover when store in cool, ventilate and dry place, away from the heat & kindling.
Do not operate in wet circumstance or it will cause sticky on the surface.
Working temperature arranges from -10℃ to 45℃.
Over dosed hardener (more than 3%) may cause the color change of the colloid and reduction of adhesion.
High temperature (℃) may cause the color change and reduction of adhesion .
Do not use the marble adhesive for structural adherence, for dry-hanging of stones purpose, please use our epoxy base AB adhesive.
Do not exposure to wetting and freezing temperature too much.
From the supplier
Direction For Use.
Keep the application surface dry and clean
The ratio between Part A (marble adhesive) and Part B (Hardener) is 100: 3,
If the end user wants to expedite or slow down the curing time, they can increase or reduce the quantity of Part B (Hardener), but too much Part B (Hardener) may change the color of the adhesive after its cured.
Mix thoroughly and apply with facer.
Attention
Do not return the mixed glue to the original packing, close the cover when store in cool, ventilate and dry place, away from the heat & kindling.
Do not operate in wet circumstance or it will cause sticky on the surface.
Working temperature arranges from -10℃ to 45℃.
Over dosed hardener (more than 3%) may cause the color change of the colloid and reduction of adhesion.
High temperature (℃) may cause the color change and reduction of adhesion .
Do not use the marble adhesive for structural adherence, for dry-hanging of stones purpose, please use our epoxy base AB adhesive.
Do not exposure to wetting and freezing temperature too much.
About the supplier
Main products: Paints and intermediates
- ✓Exhibited at 10 of the last 10 Canton Fairs
- ✓Manufacturer
- ✓Founded 2007
- ✓Canton Fair Premium Supplier
- ✓National high-tech enterprise
Manufacturing exhibitors show in Phase 1 of the Canton Fair, 15 to 19 October 2026.
- Exhibited at 10 of the last 10 Canton Fairs
- Manufacturer
- Founded 2007
- Canton Fair Premium Supplier
More from Jiangsu Dalishi Investment Co., Ltd
Similar products from other suppliers
