Machine tool
RAYMAX 400T/4000 Hydraulic CNC Press Brake with DA69S 8+1 Axis
anhui zhongrui machine manufacturing co.,ltd10/10 fairsManufacturerModel RX-S 400T/4000
$81,00000–$93,25000/ unit FOB
Unit not stated by the supplier (piece, set, box); we confirm it when we get the quote.
MOQ 1 unit
Estimated landed cost
$112,084 / unit
range $104,206–$119,962 · total ≈ $11,208,388
See what’s includedHide breakdown
- FOB goods (100)
- $8,712,500
- Ocean freight + handling (5.0 CBM, volume guessed from price)
- $1,300
- US duty (3.5%)
- $304,938
- Section 301 tariff (25.0%)
- $2,178,125
- Customs fees (MPF/HMF)
- $11,525
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (100)
- $8,712,500
- Ocean freight + handling (5.0 CBM, volume guessed from price)
- $1,300
- US duty (3.5%)
- $304,938
- Section 301 tariff (25.0%)
- $2,178,125
- Customs fees (MPF/HMF)
- $11,525
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
RAYMAX 400T/4000 Hydraulic CNC Press Brake with DA69S 8+1 Axis
anhui zhongrui machine manufacturing co.,ltd10/10 fairsManufacturerModel RX-S 400T/4000
$81,00000–$93,25000/ unit FOB
Unit not stated by the supplier (piece, set, box); we confirm it when we get the quote.
MOQ 1 unit
Estimated landed cost
$112,084 / unit
range $104,206–$119,962 · total ≈ $11,208,388
See what’s includedHide breakdown
- FOB goods (100)
- $8,712,500
- Ocean freight + handling (5.0 CBM, volume guessed from price)
- $1,300
- US duty (3.5%)
- $304,938
- Section 301 tariff (25.0%)
- $2,178,125
- Customs fees (MPF/HMF)
- $11,525
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
- FOB goods (100)
- $8,712,500
- Ocean freight + handling (5.0 CBM, volume guessed from price)
- $1,300
- US duty (3.5%)
- $304,938
- Section 301 tariff (25.0%)
- $2,178,125
- Customs fees (MPF/HMF)
- $11,525
Estimate in USD to a US port using category averages, rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.
Verify from $29 · written report in 3 business days · 100% refund if not satisfied
About this product
- Materials: steel plate
- Size: 4800*2000*2950
- Color: customized
- Suitable for: AluminumOther
- Warranty: 2-year
- Automatic grade: Other
- Exports to: Africa, Middle East, Southeast Asia, South Asia, Central Asia, USA and Canada, Latin America, Russia, EU, Other European Countries, Others
- Made in: Anhui, China
About this product
- Materials: steel plate
- Size: 4800*2000*2950
- Color: customized
- Suitable for: AluminumOther
- Warranty: 2-year
- Automatic grade: Other
- Exports to: Africa, Middle East, Southeast Asia, South Asia, Central Asia, USA and Canada, Latin America, Russia, EU, Other European Countries, Others
- Made in: Anhui, China
Product details
| Materials | steel plate |
|---|---|
| Size | 4800*2000*2950 |
| Color | customized |
| Suitable for | AluminumOther |
| Warranty | 2-year |
| Automatic grade | Other |
| Waterproof rating | Other |
Product details
| Materials | steel plate |
|---|---|
| Size | 4800*2000*2950 |
| Color | customized |
| Suitable for | AluminumOther |
| Warranty | 2-year |
| Automatic grade | Other |
| Waterproof rating | Other |
From the supplier
RAYMAX CNC Hydraulic Press Brake WF67K-125T/3200 with ESA 875 8+1 Axis
CNC Hydraulic Press Brake is a high-precision machine for bending sheet metal, combining hydraulic power with servo-electric efficiency. It uses CNC system to control the ram's position and a programmable back gauge. The hybrid drive reduces energy consumption and noise while enabling fast, responsive operation. Integrated angle measurement and feedback systems guarantee consistent results. Widely used in manufacturing, it handles complex bending sequences with ease, improving productivity and part repeatability. Its robust design, intelligent controls, and support for various tooling make it essential for modern metal fabrication, delivering high-quality, consistent results in demanding industrial applications.
Features
1. Press brake features a 400-ton bending force and a 4-meter bed length, enabling it to handle large and thick metal sheets.
2. Hydraulic Press brake with 8+1 axis, refers to its advanced CNC Delem control system, which automates the adjustment of the back gauge and slipper height.
3. Press brake combined with a precise hydraulic servo control system, high-resolution grating ruler feedback, and an automated back gauge, which can achieve positioning accuracy and repeatability, meeting the production needs of large quantities and high requirements.
4. Press brake uses high-performance hydraulic servo pumps and proportional valves, precise control of slider speed, pressure, and position can be achieved.
Detail Images
1. DELEM DA69S
It equipped with a 24 inch high-resolution color TFT display screen, supports 2D/3D graphical touch programming, has 3D machine model visualization function, and integrates Profile S3D offline programming software to achieve efficient and intuitive operation and programming experience.
2. Inovance Servo Motor Realize high-precision, high-speed, and controllable driving of various motion axes in the bending machine, thereby ensuring the accuracy, repeatability, and automation level of the bending process. Reduce oil consumption and achieve high cleanliness. Reduce noise. Save energy by over 25% and improve work efficiency
3. Crowning system
Implemented through distress programming deflection to counteract any possible deflection under load or compensate for any tool wear, ensuring that the contact surfaces under load are parallel to each other.
4. Hydraulic Valve BOSCH-REXROTH
The use of servo controlled toothed belt mechanism instead of stepper motor is energy-saving, efficient, stable, and reliable.
5. Hydraulic Clamping
WILA Hydraulic Clamping System is bearing New standard top tools which is suitable for head and shoulder.
6. 8 Axis Control
*X1, X2, R1, R2, Z1, Z2
*Ball screws and linear guide on X, R-axis
*Precision linear guide and YYC rack on axes Z1‐Z2.
*Fingers with double stop and micrometric adjustment.
*Mechanical accuracy ± 0.03 mm.
7. Lazersafe Laser Protection
Lazersafe device comprehensively protects the personal safety of bending machine operators and avoids danger due to the rapid movement of the slider on the machine. Once an obstruction enters the Lazersafe protection zone, it will immediately send a signal and interrupt the downward movement of the slider.
8. Followers System
Recommended for heavy plates or large and thin plates. Support long workpieces to prevent sagging. Improve operational safety, bending accuracy, and consistency. Cooperate with the rear stopper to achieve precise positioning.
CNC Hydraulic Press Brake is a high-precision machine for bending sheet metal, combining hydraulic power with servo-electric efficiency. It uses CNC system to control the ram's position and a programmable back gauge. The hybrid drive reduces energy consumption and noise while enabling fast, responsive operation. Integrated angle measurement and feedback systems guarantee consistent results. Widely used in manufacturing, it handles complex bending sequences with ease, improving productivity and part repeatability. Its robust design, intelligent controls, and support for various tooling make it essential for modern metal fabrication, delivering high-quality, consistent results in demanding industrial applications.
Features
1. Press brake features a 400-ton bending force and a 4-meter bed length, enabling it to handle large and thick metal sheets.
2. Hydraulic Press brake with 8+1 axis, refers to its advanced CNC Delem control system, which automates the adjustment of the back gauge and slipper height.
3. Press brake combined with a precise hydraulic servo control system, high-resolution grating ruler feedback, and an automated back gauge, which can achieve positioning accuracy and repeatability, meeting the production needs of large quantities and high requirements.
4. Press brake uses high-performance hydraulic servo pumps and proportional valves, precise control of slider speed, pressure, and position can be achieved.
Detail Images
1. DELEM DA69S
It equipped with a 24 inch high-resolution color TFT display screen, supports 2D/3D graphical touch programming, has 3D machine model visualization function, and integrates Profile S3D offline programming software to achieve efficient and intuitive operation and programming experience.
2. Inovance Servo Motor Realize high-precision, high-speed, and controllable driving of various motion axes in the bending machine, thereby ensuring the accuracy, repeatability, and automation level of the bending process. Reduce oil consumption and achieve high cleanliness. Reduce noise. Save energy by over 25% and improve work efficiency
3. Crowning system
Implemented through distress programming deflection to counteract any possible deflection under load or compensate for any tool wear, ensuring that the contact surfaces under load are parallel to each other.
4. Hydraulic Valve BOSCH-REXROTH
The use of servo controlled toothed belt mechanism instead of stepper motor is energy-saving, efficient, stable, and reliable.
5. Hydraulic Clamping
WILA Hydraulic Clamping System is bearing New standard top tools which is suitable for head and shoulder.
6. 8 Axis Control
*X1, X2, R1, R2, Z1, Z2
*Ball screws and linear guide on X, R-axis
*Precision linear guide and YYC rack on axes Z1‐Z2.
*Fingers with double stop and micrometric adjustment.
*Mechanical accuracy ± 0.03 mm.
7. Lazersafe Laser Protection
Lazersafe device comprehensively protects the personal safety of bending machine operators and avoids danger due to the rapid movement of the slider on the machine. Once an obstruction enters the Lazersafe protection zone, it will immediately send a signal and interrupt the downward movement of the slider.
8. Followers System
Recommended for heavy plates or large and thin plates. Support long workpieces to prevent sagging. Improve operational safety, bending accuracy, and consistency. Cooperate with the rear stopper to achieve precise positioning.
From the supplier
RAYMAX CNC Hydraulic Press Brake WF67K-125T/3200 with ESA 875 8+1 Axis
CNC Hydraulic Press Brake is a high-precision machine for bending sheet metal, combining hydraulic power with servo-electric efficiency. It uses CNC system to control the ram's position and a programmable back gauge. The hybrid drive reduces energy consumption and noise while enabling fast, responsive operation. Integrated angle measurement and feedback systems guarantee consistent results. Widely used in manufacturing, it handles complex bending sequences with ease, improving productivity and part repeatability. Its robust design, intelligent controls, and support for various tooling make it essential for modern metal fabrication, delivering high-quality, consistent results in demanding industrial applications.
Features
1. Press brake features a 400-ton bending force and a 4-meter bed length, enabling it to handle large and thick metal sheets.
2. Hydraulic Press brake with 8+1 axis, refers to its advanced CNC Delem control system, which automates the adjustment of the back gauge and slipper height.
3. Press brake combined with a precise hydraulic servo control system, high-resolution grating ruler feedback, and an automated back gauge, which can achieve positioning accuracy and repeatability, meeting the production needs of large quantities and high requirements.
4. Press brake uses high-performance hydraulic servo pumps and proportional valves, precise control of slider speed, pressure, and position can be achieved.
Detail Images
1. DELEM DA69S
It equipped with a 24 inch high-resolution color TFT display screen, supports 2D/3D graphical touch programming, has 3D machine model visualization function, and integrates Profile S3D offline programming software to achieve efficient and intuitive operation and programming experience.
2. Inovance Servo Motor Realize high-precision, high-speed, and controllable driving of various motion axes in the bending machine, thereby ensuring the accuracy, repeatability, and automation level of the bending process. Reduce oil consumption and achieve high cleanliness. Reduce noise. Save energy by over 25% and improve work efficiency
3. Crowning system
Implemented through distress programming deflection to counteract any possible deflection under load or compensate for any tool wear, ensuring that the contact surfaces under load are parallel to each other.
4. Hydraulic Valve BOSCH-REXROTH
The use of servo controlled toothed belt mechanism instead of stepper motor is energy-saving, efficient, stable, and reliable.
5. Hydraulic Clamping
WILA Hydraulic Clamping System is bearing New standard top tools which is suitable for head and shoulder.
6. 8 Axis Control
*X1, X2, R1, R2, Z1, Z2
*Ball screws and linear guide on X, R-axis
*Precision linear guide and YYC rack on axes Z1‐Z2.
*Fingers with double stop and micrometric adjustment.
*Mechanical accuracy ± 0.03 mm.
7. Lazersafe Laser Protection
Lazersafe device comprehensively protects the personal safety of bending machine operators and avoids danger due to the rapid movement of the slider on the machine. Once an obstruction enters the Lazersafe protection zone, it will immediately send a signal and interrupt the downward movement of the slider.
8. Followers System
Recommended for heavy plates or large and thin plates. Support long workpieces to prevent sagging. Improve operational safety, bending accuracy, and consistency. Cooperate with the rear stopper to achieve precise positioning.
CNC Hydraulic Press Brake is a high-precision machine for bending sheet metal, combining hydraulic power with servo-electric efficiency. It uses CNC system to control the ram's position and a programmable back gauge. The hybrid drive reduces energy consumption and noise while enabling fast, responsive operation. Integrated angle measurement and feedback systems guarantee consistent results. Widely used in manufacturing, it handles complex bending sequences with ease, improving productivity and part repeatability. Its robust design, intelligent controls, and support for various tooling make it essential for modern metal fabrication, delivering high-quality, consistent results in demanding industrial applications.
Features
1. Press brake features a 400-ton bending force and a 4-meter bed length, enabling it to handle large and thick metal sheets.
2. Hydraulic Press brake with 8+1 axis, refers to its advanced CNC Delem control system, which automates the adjustment of the back gauge and slipper height.
3. Press brake combined with a precise hydraulic servo control system, high-resolution grating ruler feedback, and an automated back gauge, which can achieve positioning accuracy and repeatability, meeting the production needs of large quantities and high requirements.
4. Press brake uses high-performance hydraulic servo pumps and proportional valves, precise control of slider speed, pressure, and position can be achieved.
Detail Images
1. DELEM DA69S
It equipped with a 24 inch high-resolution color TFT display screen, supports 2D/3D graphical touch programming, has 3D machine model visualization function, and integrates Profile S3D offline programming software to achieve efficient and intuitive operation and programming experience.
2. Inovance Servo Motor Realize high-precision, high-speed, and controllable driving of various motion axes in the bending machine, thereby ensuring the accuracy, repeatability, and automation level of the bending process. Reduce oil consumption and achieve high cleanliness. Reduce noise. Save energy by over 25% and improve work efficiency
3. Crowning system
Implemented through distress programming deflection to counteract any possible deflection under load or compensate for any tool wear, ensuring that the contact surfaces under load are parallel to each other.
4. Hydraulic Valve BOSCH-REXROTH
The use of servo controlled toothed belt mechanism instead of stepper motor is energy-saving, efficient, stable, and reliable.
5. Hydraulic Clamping
WILA Hydraulic Clamping System is bearing New standard top tools which is suitable for head and shoulder.
6. 8 Axis Control
*X1, X2, R1, R2, Z1, Z2
*Ball screws and linear guide on X, R-axis
*Precision linear guide and YYC rack on axes Z1‐Z2.
*Fingers with double stop and micrometric adjustment.
*Mechanical accuracy ± 0.03 mm.
7. Lazersafe Laser Protection
Lazersafe device comprehensively protects the personal safety of bending machine operators and avoids danger due to the rapid movement of the slider on the machine. Once an obstruction enters the Lazersafe protection zone, it will immediately send a signal and interrupt the downward movement of the slider.
8. Followers System
Recommended for heavy plates or large and thin plates. Support long workpieces to prevent sagging. Improve operational safety, bending accuracy, and consistency. Cooperate with the rear stopper to achieve precise positioning.
About the supplier
anhui zhongrui machine manufacturing co.,ltd
Main products: Press brake,Hydraulic press machine,Punching And Shearing Machine,Power press,Other Large Machinery u0026 Equipment
- ✓Exhibited at 10 of the last 10 Canton Fairs
- ✓Manufacturer
- ✓Founded 2002
Manufacturing exhibitors show in Phase 1 of the Canton Fair, 15 to 19 October 2026.
75
trust
- Exhibited at 10 of the last 10 Canton Fairs
- Manufacturer
- Founded 2002
Canton Fair booth: 19.1H24-25 · Large Machinery & Equipment (140th session)
More from anhui zhongrui machine manufacturing co.,ltd
Hydraulic CNC servo press brake with DA53T
$13,000.00–$20,000.00 / unit FOB
~$21242.47 landed · 100 pcs
Hydraulic CNC servo press brake with CT8
$9,300.00–$12,000.00 / unit FOB
~$13717.91 landed · 100 pcs
RAYMAX 135T/3200 Hydraulic CNC Press Brake with DA66T 6+1 Axis
$33,650.00–$39,250.00 / unit FOB
~$46903.16 landed · 100 pcs
RAYMAX 125T/3200 Hydraulic CNC Press Brake with ESA 875 4+1 Axis
$22,400.00–$28,000.00 / unit FOB
~$32432.85 landed · 100 pcs
RAYMAX 125T/3200 CNC Servo Press Brake with DA53T 4+1 Axis
$22,400.00–$28,000.00 / unit FOB
~$32432.85 landed · 100 pcs
RAYMAX 160T/3200 Hydraulic CNC Press Brake with DA66T 4+1 Axis
$32,910.00–$39,110.00 / unit FOB
~$46337.21 landed · 100 pcs
RAYMAX 125T/3200 Hydraulic CNC Press Brake with ESA 875 6+1 Axis
$29,000.00–$35,000.00 / unit FOB
~$41179.35 landed · 100 pcs
RAYMAX 125T/3200 Hydraulic CNC Press Brake with ESA 875 8+1 Axis
$34,000.00–$40,000.00 / unit FOB
~$47610.60 landed · 100 pcs
Similar products from other suppliers
Big Type Hydraulic Shearing Machine
$8,100.00–$52,000.00 / unit FOB
~$38671.16 landed · 100 pcs
CNC Press Brake
$33,900.00–$50,000.00 / unit FOB
~$53977.53 landed · 100 pcs
New
CNC Lighting Pole Tandem Bending Machine
$20,000.00–$300,000.00 / unit FOB
~$205819.35 landed · 100 pcs
NC Press Brake with E300
$8,000.00–$30,000.00 / unit FOB
~$24458.10 landed · 100 pcs
CNC Lighting Pole Tandem Press Brake
$20,000.00–$300,000.00 / unit FOB
~$205819.35 landed · 100 pcs
Shearing machine
$8,100.00–$52,000.00 / unit FOB
~$38671.16 landed · 100 pcs
$81000.00–$93250.00 / unit
MOQ 1 · Verify for $29