Description

OLV20 is one component spray polyurethane foam, used preferable for insulation and installation, such as bonding, sound and heat insulation, sealing, filling up crack and gap.

Product Features

1. Working temperature: +5℃~+35℃.

2. Optimal working temperature +18℃ to +80℃.

3. Temperature resistance when cured: -30℃~+80℃.

4. Can be adhered to the surface of concrete, panels, sheet and plastic, not Teflon and silicon resin.

5. It contains CFC-free propellants which are harmless to health and ozone layer.

How To Use

1. Shake can thoroughly for at least one minute.

2. Clean and moisten surfaces with a water sprayer prior to application.

3. Place the can upside down, firmly screw can on adapter and turn the flow adjustment screw anti-clockwise.

4. Fill holes and cavities approximately 50% from bottom to top.

5. Foam begins to cure after 10 minutes. Further processing should be done an hour later.

6. Use knife to smooth out the cured foam and treat surface with cement, paint and silicone.

Security Advice

1. Keep the can away from children.

2. Faraway from fire and prohibition of being close to inflammables and explosives.

3. Continuous air circulation is required because of inflammable gas which is produced when working. Worker should wear gloves and goggles.

4. Avoid direct sun, stored in a cool, ventilated, dry place, temperature is below +50℃.

5. It's sticky before curing and has permeability to clothes, please keep away from cloths.

Regular Colors

White

750ml can

Around 20 days upon down payment and confirmation of design for can and carton by customer

Certificates

Olivia Factory