【Multi-purpose DMM】With 6000 counts True RMS auto-ranging,the multi tester can accurately measure AC&DC voltage and current,ohm,temperature, capacitance, diode, continuity, Hz, duty cycle,etc.

【Non-Contact Voltage】NCV (non-contact voltage detection) with a sensitive sensor to detect AC voltage.When NCV testing above 90V,the buzzer will [LIGHT] and [BEEP] alarm to remind you and it can detect the wire live.

【Safety Protection】Pass IEC rated CAT II 600V, CAT III 300V. The amp meter is built into two fuse tubes. The fuse effectively protects the multimeter with overload protection in all ranges.Make it safely using for a variety of electrical work.

【Easy to Use】2-3s/times for sampling;Max/Min;Data hold button holds a reading for easy recording;With backlight LCD enables the readings to be clearly visible in dimly light areas;Built-in support stand can be hand held or stood using its fold out stand.

Specification:

Display:6000 Counts
Range:Auto-ranging
DC Voltage:600mV/6V/60V/600V (+/-0.5+2)
AC Voltage:6V/60V/600V (+/-1.5%+3)
DC Current:60mA/600mA/6A/10A (+/-1.5+3)
AC Current:60mA/600mA/6A/10A (+/-1.5+3)
Resistance:600/6K/60K/600K/6M/60M Ohm (+/-1.0+2)
Capacitance:6nF/60nF/600nF/6uF/60uF/600uF/6mF/60mF (+/-2.5+5)
Temperature:-20-1000℃ (+/-3℃)
Frequency(Hz):9.999/99.99/999.9/9.999K/99.99K/200K Hz (+/-0.1+2)
Duty Cycle:0.1%-99.9% (+/-2.0+2)

Features:

✔Diodes Test
✔Continuity Test
✔Dual Fuse for Anti-Burn
✔Low Battery Indication
✔Data Hold Function
✔℃/℉ Switchable
✔Relative Value
✔Max/Min
✔NCV(Non-Contact Voltage Detection)
✔Backlight -- Press “HOLD” button over 2 second
✔Auto Power Off -- After 15 mins without further operation
✔REL Button -- Press REL key to reset the data to zero, more accurate data can be obtained