Description

OLV66 Liquid Nails has strong adhesion and can replace nails to the greatest extent. It is most suitable for firmly bonding all kinds of (building materials). No drilling, screws or nails are required. Time saving, efficient and fast.

Main Purposes

1 Bond the door frame, door and window cover, stairs, etc. in the house decoration. Bonding wood to other materials such as aluminum and stainless steel.

2. Bonding flooring, insulation, wood, melamine, wood, plaster, and metal trim in house decoration.

3. Bonding ceramic tiles, cultural stone, marble, marble, aluminum edge and other stone window sills, cabinet counters, etc.

4. Bonding mirrors, glass, ceramics, long-term load-bearing hooks, etc.

5. Bonding hangings, etc. of various materials inside and outside the room.

Properties

Adaptive Temperature：-30℃-80℃                   

Construction Temperature：-20℃-35℃

Solid Content：  73% 

Application

1. Non-nail glue construction material selection: It is most suitable for bonding the following materials in concrete, all kinds of stone, wall plaster, wood and plywood surface: wood, plastic, metal, threshold, signage, slat, door base, window sill , junction box, sheet material, gypsum board, embellished stone, ceramic tile, etc., not suitable for foam materials.

2. Clean the construction surface to ensure no oil and dirt, and remove all loose components;

3. Cut the nail-free hose mouth, puncture the nozzle protective film, put on the rubber nozzle, and squeeze it with a sealing gun;

4. Adhere a few rows of glue-free glue on a single side with a drop of glue or a zigzag pattern (each line is approximately 30 cm apart). Always apply adhesive to the edges of all corners of the sheet and it will be needed within 5 minutes. The bonded parts are placed in place, pressed and tapped with a rubber mallet. If the material is large, heavy, and if necessary, clamp or support (about 24 hours). The ideal effect is achieved after 3 days of bonding.

Limitations

The nail-free adhesive operating environment temperature should be between -5 ° C and +40 ° C, stored in a cool, frost-free, well-sealed place. When the nail-free glue has not been condensed, it can be removed with loose water. After drying, it can be scraped or ground to remove the residue. This product can be used in conjunction with the laying of the floor.

Technology Data

The following data are only for reference purpose, not intended for use in preparing specification. 

Regular Colors

White, Beige & Clear Colors

300ml & 310ml Cartridge

Around 15 days upon down payment and confirmation of design for cartridge and carton by customer

Certificates

Olivia Factory