Lightweight high strength fireproof mgo partition board
ZHANGJIAGANG WELLYOUNG MATERIAL CO.,LTD
The supplier hasn’t listed a price. We can get their current prices and MOQ.
Verify from $29 · written report in 3 business days · 100% refund if unreachable
Lightweight high strength fireproof mgo partition board
ZHANGJIAGANG WELLYOUNG MATERIAL CO.,LTDThe supplier hasn’t listed a price. We can get their current prices and MOQ.
Verify from $29 · written report in 3 business days · 100% refund if unreachable
About this product
- Color: white，grey
- Exports to: Africa, Middle East, Southeast Asia, USA and Canada, Russia, EU, Japan and South Korea
About this product
- Color: white，grey
- Exports to: Africa, Middle East, Southeast Asia, USA and Canada, Russia, EU, Japan and South Korea
Product details
| Color | white，grey |
|---|
Product details
| Color | white，grey |
|---|
From the supplier
Magnesium Oxide boards (MGO board) are certified fire resistant, water resistant, high-impact interior and exterior construction panel. MgO panel’s load capacity meets the requirements of both residential and commercial structures.
With its mold resistance, fire resistance and high-impact properties, MgO boards could be used in high value areas i.e. safe rooms and equipment rooms or when health and safety concerns exist.
MgO board is light tan to cream in color. Standard production material is very smooth on one side and sand textured on the other.
MgO board accepts any type of paint, wallpaper and tiling. Standard edges are square or tapered, special edges and sizes are available though. It may be cut, trimmed or shaped using ordinary power or hand tools.
Features of mgo board:
• Fire resistance
• Water resistance
• Mould and Mildew Resistance
•Freeze/thaw cycling
• Environmentally friendly characteristics (contains no asbestos, no toxic substances, lower carbon footprint than cement based products)
• Easy to work with
Technical Specifications
PRODUCT SPECIFICATIONS
Thickness(mm) Width(mm) Length(mm) Weight(kg)
3-20 1220 2440 10.7-62.5
3-20 915 2135 7.0-41.0
Notes: products can be produced according to customer specific requirements.
BOARD TOLERANCE
Thickness Length tolerance Width tolerance Thickness tolerance Edge straight Suface flatness
(mm) (mm) (mm) (mm) (mm/m) (mm/m）
3-20 ±3 ±3 ±0.3 ≤2 ≤2
Physical Data Sheet: The following shows the average data resulted from a production sampling.
Density:
950- 1200 kg/m3
Moisture content:
≤ 10%
P.H. Value:
8 – 9
Flexural strength:
≥ 169 Kgf/CM2
Impact strength:
7.1 Kj/M2 (8MM)
Adhesion bond strength:
7.9 Mpa (10MM)
Screws withdraw strength:
0.9 – 1.0 N
Length variation due to water absorption:
0.06%
Thermal conductivity at 50°c:
≤ 0.21/W.mK
Moisture Movement
≤ 0.10%
Asbestos content:
Not detected
Formaldehyde content:
Not detected
Radioactivity:
GB6566/2001 A Class
Sound insulation:
44 db (6MM)
Appilications for mgo boad:
-
Interior and exterior wall board
-
Shaft-liner
-
Ceiling / soffits or underlayment board
-
Tile backer board
-
Base board to receive new finish
-
Part of interior or exterior cladding or rendering system
-
Sheathing material for structural insulated panel systems (SIPS)
-
Exterior shuttering
From the supplier
Magnesium Oxide boards (MGO board) are certified fire resistant, water resistant, high-impact interior and exterior construction panel. MgO panel’s load capacity meets the requirements of both residential and commercial structures.
With its mold resistance, fire resistance and high-impact properties, MgO boards could be used in high value areas i.e. safe rooms and equipment rooms or when health and safety concerns exist.
MgO board is light tan to cream in color. Standard production material is very smooth on one side and sand textured on the other.
MgO board accepts any type of paint, wallpaper and tiling. Standard edges are square or tapered, special edges and sizes are available though. It may be cut, trimmed or shaped using ordinary power or hand tools.
Features of mgo board:
• Fire resistance
• Water resistance
• Mould and Mildew Resistance
•Freeze/thaw cycling
• Environmentally friendly characteristics (contains no asbestos, no toxic substances, lower carbon footprint than cement based products)
• Easy to work with
Technical Specifications
PRODUCT SPECIFICATIONS
Thickness(mm) Width(mm) Length(mm) Weight(kg)
3-20 1220 2440 10.7-62.5
3-20 915 2135 7.0-41.0
Notes: products can be produced according to customer specific requirements.
BOARD TOLERANCE
Thickness Length tolerance Width tolerance Thickness tolerance Edge straight Suface flatness
(mm) (mm) (mm) (mm) (mm/m) (mm/m）
3-20 ±3 ±3 ±0.3 ≤2 ≤2
Physical Data Sheet: The following shows the average data resulted from a production sampling.
Density:
950- 1200 kg/m3
Moisture content:
≤ 10%
P.H. Value:
8 – 9
Flexural strength:
≥ 169 Kgf/CM2
Impact strength:
7.1 Kj/M2 (8MM)
Adhesion bond strength:
7.9 Mpa (10MM)
Screws withdraw strength:
0.9 – 1.0 N
Length variation due to water absorption:
0.06%
Thermal conductivity at 50°c:
≤ 0.21/W.mK
Moisture Movement
≤ 0.10%
Asbestos content:
Not detected
Formaldehyde content:
Not detected
Radioactivity:
GB6566/2001 A Class
Sound insulation:
44 db (6MM)
Appilications for mgo boad:
-
Interior and exterior wall board
-
Shaft-liner
-
Ceiling / soffits or underlayment board
-
Tile backer board
-
Base board to receive new finish
-
Part of interior or exterior cladding or rendering system
-
Sheathing material for structural insulated panel systems (SIPS)
-
Exterior shuttering
About the supplier
- ✓Exhibited at 6 recent Canton Fairs
- ✓Foreign Trade Company
- ✓Founded 2012
- Exhibited at 6 recent Canton Fairs
- Foreign Trade Company
- Founded 2012
Similar products from other suppliers
