FEATURES

This product is applied to the new house and new car in treatment of formaldehyde, benzene, ammonia, TVOC and other harmful gases, it can remove smoke, from smell, musty, prevent bacteria, mildew etc. This product is atomized after adhesion on the surface, forming a invisible nano film layer, long-term effective removal of solid formaldehyde, does not affect the function and appearance, this product does not contain organic solvent, non-toxic, non carcinogenic substances, harmless to human and pets.

METHOD

1 Spraying this product evenly on the inner surface of the artificial board furniture (such as the positive and negative side of the cavity of drawer, the inner of wardrobe and the back wall, etc.). 

2 When the inner wall of the furniture is bare board, the use of this product should be about 50g/m2. 

3 When the inner wall of the furniture has been treated, the use of this product is about 25g/m2. 

4 The combination of furniture should be removed from the edge of the treatment of non cutting edge and non veneer parts, including the installation of handle, track, hinge holes, etc, in order to achieve the best results should be appropriate to paint. If the furniture joints and not easy to brush can be used needle injection.

CAUTION 

1 This product is water agent, brushing the surface with this product will increase the moisture content, should be fully ventilated dry after brushed. 

2 In order to sake of case, the outer surface of the furniture can not be painted this product. 

3 If there are too many inner wall plates, (such as data frame, etc.), and the surface exposed, it is recommended to repeat the furniture of two times (interval time should be more than 24 hours). 

4 Furniture has been dealt with decorative surface, brushing the product within half an hour, the surface of the surplus products completely clean. 

5 This product is non-toxic, but not drinkable (please put it in children can not touch). 6 This product should be kept in a cool room.