Product characteristics:

• 1. Use safety, memory free and pollution free 3.7V Li-on battery with battery capacity up to 6500mAH.

 lithium battery overcharge, over-discharging protection, long battery Life;

• 2. Adopting environmental and high brightness SMD LED, low power consumption, one white LED lamp consumes 6w power when it is illuminated with strong light, and it can work up to 9 hours when the built-in battery is fully charged.
• 3. With Micro-USB socket, the product can be charged directly with a mobile phone charger or adapter with a USB output port.
• 4. Built-in multi-function dimming circuit, MCU control, press the light switch, you can freely choose strong light, weak light and flash (SOS signal) function, can make better use of energy according to the needs of the environment ;
• 5. The product uses the double key touch switch, increases the reliability of use.
• 6. The product adopts intelligent chip to control the charge management, with high reliability, fast charging, over-charging and over-discharging protection, trickle charging, status indication function
• 7. Lamp adopts pure aluminum electric spotlight cup, high-tech surface treatment technology, reflective efficiency with far range;
• 8. The product is equipped with headband, which is very comfortable and convenient to use,specially designed for people who work at night and dark environment.

Direction to use:

• 1. Two ways for lighting:

Way ① Press the down switch for the first time, the strong strong light is on, press it twice, the weak light is on, press it third,it is the flashlight (SOS signal for help) , press the fourth, it stop lighting, cycle by Cycle;

Way ②  In the state of strong illumination, press the switch for seconds, the brightness of the light decreases gradually. When the switch is released, the brightness of the light stops at the corresponding brightness at the time of release, and the brightness of the light does not change again after reaching the minimum brightness; and then press the switch for seconds, the brightness of the light increases gradually, the brightness of the lamp stops at the corresponding brightness when the lamp is loosened. The brightness of the lamp will not change after reaching the maximum brightness

In the state of low-light illumination, press the switch for seconds, the brightness of the light increases gradually. When the switch is released, the brightness of the light stops at the corresponding brightness at the time of release. The brightness of the light does not change again after reaching the maximum brightness, and then press the switch for seconds, the brightness of the light gradually decreases, the brightness of the lamp stops at the corresponding brightness when the lamp is loosened. The brightness of the lamp will not change after reaching the minimum brightness

• 2. Charging: Before charging the product, turn off the LED lamp, insert the charger with USB output port into the AC power socket, then pull out the cover of the product USB charging socket, insert the end of the USB cable with Micro USB plug into the product, the other end is inserted into the charger. The red indicator light is on when the lamp is charged. The green indicator light is on when the lamp is charged. It takes about 6 hours for full charging.

Warning:

• 1. Please follow the instructions requirements strictly;
• 2. Please do not replace parts by yourself .

Cautions:

• 1. Please stop use the product when the illumination turns dim ,it means the battery is almost running out,once the voltage of the product lower than 2.8V, the lithium battery of built-in low-voltage protection function will make the product enter the protection state, and the LED light will not light when the switch is pressed. At this time, it must be charged before use;
• 2. Please charge according to the nominal voltage, otherwise it will affect the charging effect if the charger is not matching to the charging parameter, even lead to safety accidents caused by the damage and all consequences borne by the doer.
• 3. Keep the product away from the unstable, flammable and humid thing while charging;
• 4. The light of the LED lamps is ultra strong, do not shine eyes directly. (Children must use under the adult's guide);
• 5. As batteries have self-discharge features, we suggest that charge it before the first use. If it is not used for a long time, please keep the battery fully charged, and charge it every three months;
• 6. The light source of this lamp cannot be replaced, when the light source to the end, the whole lamp should be scrapped.
• 7. The Product containing batteries,at the end of the battery life, please store in the appropriate place to avoid environmental pollution, scrap according to local laws and regulations;
• 8. Please follow the instructions requirements, do not take apart the product freely, the company does not assume any responsibility because of negative consequences stemming from illegal operations.
• 9. The product belongs to Class Ⅲ equipment.