Visbella® DIY Headlight Restoration Kit can yellow with age, reducing headlight brightness, and new lenses can be expensive. The Headlight Restoration Kit lets you shine and restore plastic lens, including headlights, tail lights, fog and directional lights.By restoring clarity to the lens, the performance of the headlight is improved and the appearance of the vehicle is enhanced. Now you can produce professional results with the Headlight restoration kit.Kit includes all items necessary to perform the task.

FEATURES：

• Designed to restore clarity to headlight lenses that have become yellowed, cloudy, or hazy.

• Headlight lens restoration kit improves the performance of the headlight.

• Three easy steps: sand, polish and protect.

• Comes with easy-to-use instructions.

• Car headlight restoration kit does not include household polishing machine.

• Restores headlights, taillights, fog lights or directional lights.

Product Information

Color

Transparent Liquid

Packing

Color box,36pcs/ctn

Product Size

19.5*9.0*6.5cm

HS Code

3405400000

Application

Headlight Haze,Discoloration,Yellowed Solution

Shelf life

12 months

Kit Includes

2* Waterproof Sand paper P800

2* 3ml UV Protective liquid

1* Masking Tape

2* Waterproof Sand paper P1200

1* Wool Polish Disc

1*Adaptor

2* Waterproof Sand paper P2000

1* White Sponge Disc

1* Instruction Manual

1* 85g Polishing Paste

1* Backer Pad M10 Thread

PREPARE

Clean the headlight lens with water. Mask off the area surrounding the lens to avoid scratches on nearby painted surfaces.

STEP 1 SANDING

Wet the sanding disc and attach it to the backer pad. Sand with 3 different grits to completely remove the heavy yellowing, fading and corrosion.

Note: Use the sanding discs from coarse to fine: P800- P1200 - P2000 grits. Not doing so will result in restoration failure.

STEP 2 POLISHING

Attach the wool polish disc to the backer pad and apply the polishing paste. Polish the lens until it is restored to its original condition.

Note: If polish by hand, polish with not less than 200 circular strokes clockwise.

Clean the headlight lens and make sure the lens is dry before the protection step.

STEP 3 PROTECTION

Make sure this uv liquid is applied without sunlight.

Use the white sponge disc provided in the kit. Evenly apply the protect liquid on the surface of the lens. After apply it, stay for 10-15 mins to let the liquid flow evenly itself. Then dry it in direct sunshine immediately (1-2 hours is suggested). If not, the dusts and dirts may attached to the uv liquid due to its viscosity, which will affect the brightness of the headlight.

After STEP 3, Keep the lens dry, and donot wash the car in 24 hours.

Precautions

* Avoid eye contact. Do not get on skin or clothing.
* Avoid breathing of vapors. Use only with adequate ventilation.
* Do not swallow.
* Wash thoroughly after handling. Close container after each use.

*Keep out of children.