Visit the ZHEJIANG RONGPENG AIR TOOLS CO., LTD. store

Coil Pallet Nailer CN55RS

10/10 fairsManufacturerModel CN55RS

$014/ unit FOB · ≈ converted from CNY

Unit not stated by the supplier (piece, set, box); we confirm it when we get the quote.

MOQ 100 unit

Estimated landed cost

$8.71 / unit

range $8.71–$8.71 · total ≈ $871

Quantity

See what’s included

FOB goods (100): $14
Ocean freight + handling (0.40 CBM): $820
US duty (4.0%): $0.56
Section 301 tariff (25.0%): $3.47
Customs fees (MPF/HMF): $33

Estimate in USD to a US port using category averages (HTS 8201-8207/8467), rates as of 2026-09. Other countries on request. A quote from our desk uses real carton sizes, freight and the exact tariff line.

FOB goods (100): $14
Ocean freight + handling (0.40 CBM): $820
US duty (4.0%): $0.56
Section 301 tariff (25.0%): $3.47
Customs fees (MPF/HMF): $33

Get a quote from this supplier See all sourcing services

Verify from $29 · written report in 3 business days · 100% refund if unreachable

Service: From $29 per supplier (Verify)
You get: Phone and video verification, a quote sheet and a written report
Turnaround: 3 business days
Contact details: Sent to you once your request is confirmed

If we can't reach the supplier within 3 business days, we refund the fee.

Visit the ZHEJIANG RONGPENG AIR TOOLS CO., LTD. store

Coil Pallet Nailer CN55RS

10/10 fairsManufacturerModel CN55RS

$014/ unit FOB · ≈ converted from CNY

Unit not stated by the supplier (piece, set, box); we confirm it when we get the quote.

MOQ 100 unit

Estimated landed cost

$8.71 / unit

range $8.71–$8.71 · total ≈ $871

Quantity

See what’s included

FOB goods (100): $14
Ocean freight + handling (0.40 CBM): $820
US duty (4.0%): $0.56
Section 301 tariff (25.0%): $3.47
Customs fees (MPF/HMF): $33

FOB goods (100): $14
Ocean freight + handling (0.40 CBM): $820
US duty (4.0%): $0.56
Section 301 tariff (25.0%): $3.47
Customs fees (MPF/HMF): $33

Get a quote from this supplier See all sourcing services

Verify from $29 · written report in 3 business days · 100% refund if unreachable

Service: From $29 per supplier (Verify)
You get: Phone and video verification, a quote sheet and a written report
Turnaround: 3 business days
Contact details: Sent to you once your request is confirmed

If we can't reach the supplier within 3 business days, we refund the fee.

$014/ unit FOB · ≈ converted from CNY

Unit not stated by the supplier (piece, set, box); we confirm it when we get the quote.

MOQ 100 unit

Estimated landed cost

$8.71 / unit

range $8.71–$8.71 · total ≈ $871

Quantity

See what’s included

FOB goods (100): $14
Ocean freight + handling (0.40 CBM): $820
US duty (4.0%): $0.56
Section 301 tariff (25.0%): $3.47
Customs fees (MPF/HMF): $33

FOB goods (100): $14
Ocean freight + handling (0.40 CBM): $820
US duty (4.0%): $0.56
Section 301 tariff (25.0%): $3.47
Customs fees (MPF/HMF): $33

Get a quote from this supplier See all sourcing services

Verify from $29 · written report in 3 business days · 100% refund if unreachable

Service: From $29 per supplier (Verify)
You get: Phone and video verification, a quote sheet and a written report
Turnaround: 3 business days
Contact details: Sent to you once your request is confirmed

If we can't reach the supplier within 3 business days, we refund the fee.

From the supplier

CN55RS 32-57mm diameter 2.1-2.3mm roll nails, nail cap 5.5-5.7mm nail capacity 300-350 pieces

1. Nail head and striker are heat treated by German Ipsen, high strength and wear resistance

2. The life of the firing pin exceeds 300,000 times.

3. The nailing rate can be said to be about 0.03%, and the nailing speed is faster than the same type of nail gun

4. Aviation grade bumper bumper wear resistance

5. The safety frame can be triggered only when it reaches twice the weight of the gun body, to ensure that the use of safety will not trigger accidents

6. With the function of continuous hitting: bump fire

7. High-strength plastic clips are wear-resistant

8. The gasket never wears out and does not need to be replaced

9. The handle sheath TPE material is soft and will not freeze and crack

10. At the same time, our gun body is a high-strength aluminum alloy die-cast gun body, the whole gun is durable and not afraid of falling or low temperature

From the supplier

CN55RS 32-57mm diameter 2.1-2.3mm roll nails, nail cap 5.5-5.7mm nail capacity 300-350 pieces

1. Nail head and striker are heat treated by German Ipsen, high strength and wear resistance

2. The life of the firing pin exceeds 300,000 times.

3. The nailing rate can be said to be about 0.03%, and the nailing speed is faster than the same type of nail gun

4. Aviation grade bumper bumper wear resistance

5. The safety frame can be triggered only when it reaches twice the weight of the gun body, to ensure that the use of safety will not trigger accidents

6. With the function of continuous hitting: bump fire

7. High-strength plastic clips are wear-resistant

8. The gasket never wears out and does not need to be replaced

9. The handle sheath TPE material is soft and will not freeze and crack

10. At the same time, our gun body is a high-strength aluminum alloy die-cast gun body, the whole gun is durable and not afraid of falling or low temperature

About the supplier

ZHEJIANG RONGPENG AIR TOOLS CO., LTD.

Main products: Pneumatic tools, Water nozzle, Metal paint mixer, Polisher, Polishing floor pad, Sander, Sand disc, Nail-gun, Electric wrench, Inflator gun, Air blow gun, Other Power Tools