Product DescriptionProduct NameGW902 Light IPE wood Co-extrusion WPC deckingMaterialWPC, wood plastic composite, HDPE, wood fiberFunctionAnti-slip, Anti-UV, PackageNormal package, plastic package, carton box...Length2.9meter 3.6meterLoading880sqm for 20GP

• Product performance description

Grinwood co-extrusion decking is capped wood-grain composite boardsHas a shield arround core
The material of Shield: modified plastics
Top important Advantage: color stable

Raw-material60% of wood fiberMainly use Poplar powder and Eucalyptus powderCompared with mineral fibers, wood fiber raw materials have a wide range of features, low price, can be reprocessed, can be
naturally regenerated, biodegradable, low density and so onIn addition, wood fibers are used as an enhanced material in thermoplastics and show better mechanical properties, such as low
hardness, low wear on processing equipment30% of plasticWe use HDPEThe choice of plastic mainly from its own performance, product requirements, supply situation and cost。
Due to the thermal stability of wood fibers, only thermoplastics with melting points below 200 ℃ are usually used in WPC productionCommonly used plastics are recycled polyethylene(PE), polypropylene(PP), polyvinyl chloride(PCV) etc.Among them, PE has always been the most important plastic raw material in wood plastic production.
10% additivesAdded to the formulation of plastics and other composites to improve its sun resistance and prevent or reduce the damage caused toplastics by UV rays in sunlight, collectively known as photostabilizers
Antioxidants can slow or inhibit plastic oxidation degradation
Lubricants can reduce friction and change the processing performance during the molding process of wood-plastic composite
materials
Colorants, antistatic agents, anti-mold and preservatives are also added to the formula
Quality Control

• 
  

  • 
    

Wear Resistance
Test

• 
  

Surface Hardness
Test

• 
  

  • 
    

Colorimeter
Test

• 
  

Flexural Strength
Test
Packing&ShippingCargos package suggestions belowCompany IntroductionGRINWOOD WPC is a superior alternative to traditional lumber and plastic decking products. It mixes recycled PE plastics with cellulose fiber and etrudes them into a variety of profiles, including decking, fencing, wall cladding, etc.
1. Our main market is Europe, regarding the quality, 200% better than EU standard EN15534-1
2. (FSC® 100% Certified) wood fiber is acceptable
3. Our boards can bear up to 60 ℃CertificationFAQ1. Why choose wpc as outdoor buliding material? Modern engineering and design solutions require modern materials. The usage of wood plastic materials for decking, fences and garden areas is economical, eco-friendly and future-proof solution.2. What's the Grinwood WPC made of? 
GRINWOOD WPC boards are Eco-friendly wood and plastic composite products composed from 60% wood fiber ,  30% HDPE and 10% additives.
3. How far apart should the supporting joist be?

The supporting joist below the composite decking boards should be a maximun of 350mm apart. in other words, one square meter need: 3 joist and 20 sets accessories (clips & screws)
4. Can I install the decking immediately when received the products?
When received your wpc decking boards, we recommend you allow them several days to adjust to your local temperature and conditions before starting working. We do not recommend installing your deck in cold weather.
5. Do I need special tools to install the deck? There are no specialist tools required. The decking can be installed using the same tools you would use to install timber decking.