AF50 GA18 1.25x1.00mm diameter, F straight nail 15-50mm length,

1. Nail head and striker are heat treated by German Ipsen, high strength and wear resistance

2. The life of the firing pin exceeds 200,000 times.

3. The nailing rate can be said to be about 0.03%, and the nailing speed is faster than the same type of nail gun

4. Aviation grade bumper bumper wear resistance

5. The safety frame can be triggered only when it reaches twice the weight of the gun body, to ensure that the use of safety will not trigger accidents

6. Sequential fire with one-click continuous play function

7. The muzzle sheath protects the working face-black part

8. High-strength hard alumina clips are wear-resistant

9. The nail is used up and displayed on the magazine

10. The gasket never wears out and does not need to be replaced

11. The handle sheath TPE material is soft and will not freeze and crack

12. At the same time, our gun body is a high-strength aluminum alloy die-cast gun body, the whole gun is durable and not afraid of falling or low temperature

13. Quick release jammed nail device, you can immediately remove the stuck nails to ensure efficiency

14. Nail depth adjustment device for different occasions

15.360 degree exhaust cover

Technical Parameters

Load capacity(QTY.)

100pcs(1 strip)

Nails

Uses 18 gauge brad nails 15-50mm(5/8”-2”)

Working pressure:

70 to110 PSI(4.8 to 7.5 bar)

Maximum working pressure:

120PSI (8.3bar)

Air inlet:

1/4”(6.35mm)

Dimensions:

10.39”(L)x9.45”(H)x2.28(W)” (264x240x58mm)

Weight:

2.27lbs (1.03kgs)