SpecificationsAbrasive MaterialAluminum OxideAttachment TypeInstall with angle grinder useBrandXinsiluProduct FormSanding BeltMaterial ModeGXK51-BForm TypeCoatedGrade40#，60#，800#，100#，120#，180#， 320#Max RPM2100,2500,2800Overall Diameter (Imperial) 4 inOverall Diameter (Metric)100 mmOverall Width (Imperial)13 inOverall Width (Metric)330 mmProduct ColorMaroon

Sanding Belt

• It is widely used in Grinding, Polishing, Finishing, Deburring for the industries of metallurgy, machinery,

 automobile, shipbuilding, aviation, light industry, timbering, furniture, building materials, tanning and 

textile, etc.(Butt joint, lap joint, and waves joint can be made.)

10*330mm GXK51-B Sanding Belt

• The separate flaps each attack the workpiece surface at a slightly different angle, and this varies 

slightly with the tool angle. This avoids the common problem with flat sheets, where they produce 

repeated identical scratches.

•Abrasive wear is distributed more evenly across the flaps and through the length of each flap. 

Flaps wear from their outer ends and the sheet carrier cuts back as the abrasive coating is worn away. 

The wheel remains useful even as the flaps erode. Compared to flat sheets, that are discarded after 

only a small area of the abrasive is truly worn-out, this is a much more efficient use of the abrasive 

material.

                      

• Angled, durable, Y-weight polyester flaps provide greater surface contact and are the best choice for

 fast stock removal – with significantly enhanced life, grain retention, and fray resistance                    

• The best choice for coarse grit blending, deburring, and stock removal                   

• Their fiberglass/resin backing plates are the most popular plate configuration due to high strength, 

lightweight, ability to absorb vibration, and operator comfort   

Contrast: